Unadhi Guides

EU AI Act SME or small mid-cap (SMC) size check sheet after the Digital Omnibus: headcount, turnover, balance sheet and the two-period rule (Recommendations 2003/361 and 2025/1099), Article 99(6a) fine caps before the 2 December 2026 bans, for accountants and SME clients

Updated 9 Nov 2026 · Disclosure: the EURO AI Register mentioned below is an Unadhi product with a free edition. This guide is for information only, not legal advice.

What you get: a finished AI Act SME / SMC size check sheet for accountants, tax advisers, bookkeepers and the businesses they advise. You already hold the figures: headcount, turnover, balance sheet and the ownership chart. One row per client returns SME (MICRO), SME (SMALL), SME (MEDIUM), SMC, LARGE, CHECK BY HAND or MISSING DATA. It applies the two-period rule, shows the maximum Article 99(4) and Article 99(3) fines for that size, the days left to 2 December 2026 and 2 December 2027, and a to-do list citing the articles. Rebuild it from the formulas below (tested in LibreOffice on fourteen made-up rows). Also included: a checklist and a "what to tell the client" email.

Deliverable: rebuild the Excel/LibreOffice check sheet from the column list and formulas in Step 1.

Short answer: the Digital Omnibus on AI, Regulation (EU) 2026/1744, added two definitions to the AI Act. An SME is defined by Commission Recommendation 2003/361/EC (fewer than 250 staff and turnover up to EUR 50 million and/or balance sheet up to EUR 43 million). A small mid-cap enterprise (SMC) is defined by Commission Recommendation (EU) 2025/1099 (not an SME, fewer than 750 staff, turnover up to EUR 150 million or balance sheet up to EUR 129 million). The difference matters. SMEs get the lower fine cap for every AI Act fine (Article 99(6)). SMCs get it only for Article 99(4) and (5) fines (new Article 99(6a)), not for Article 5 bans, and new Article 5 bans apply from 2 December 2026. SMEs and SMCs can both use a simplified technical documentation form (Article 11(1)). The simplified quality management system in Article 63(1) is for SMEs only, and only for SMEs with no partner or linked enterprises.

Why this lands on the accountant's desk

Partner programme opening soon

Partner programme opening soon: join the free waitlist. Planned terms are 50% of each referred sale (75% once you have 5+ paying customers), single level, paid through Gumroad only from revenue received.

Step 1: the check sheet

Create a sheet named Clients with headers in row 1 and the first client in row 2. Enter B to D as plain numbers (headcount in annual work units, money in EUR million). Create a sheet named Settings and put =TODAY() in B1 (our test file fixes B1 at 9 Nov 2026). Copy K2 to P2 down. TEXTJOIN works in Excel 2019 or later, LibreOffice and Google Sheets.

ColHeader / formulaNotes
AClientYour label
BStaff headcount in annual work units (AWU), including partner/linked dataRec 2003/361 Annex Art 5; Rec 2025/1099 pt 5
CAnnual turnover, EUR million, excluding VATLatest approved accounts (Annex Art 4(1); pt 4.1)
DAnnual balance sheet total, EUR millionLatest approved accounts
E25%+ of capital or voting rights controlled by public bodies? (Y/N/Unsure)Annex Art 3(4); pt 3.3
FPartner (25%+) or linked (control) enterprises? (Y/N/Unsure)Annex Art 3; pt 3
GIf yes: partner data added pro rata and linked data at 100%? (Y/N)Annex Art 6(2); pt 6.2
HStatus held going into this period (Micro/Small/Medium/SMC/Large/New)Two-period rule input
IDid the previous period's figures also give this period's size? (Y/N)Annex Art 4(2); pt 4.2
JAI Act role (High-risk provider / Other provider / Deployer / None)AI Act Art 3(3)/(4)
KSize on this period's figures: =IF(A2="","",IF(OR(B2="",C2="",D2=""),"MISSING DATA",IF(AND(B2<10,OR(C2<=2,D2<=2)),"MICRO",IF(AND(B2<50,OR(C2<=10,D2<=10)),"SMALL",IF(AND(B2<250,OR(C2<=50,D2<=43)),"MEDIUM",IF(AND(B2<750,OR(C2<=150,D2<=129)),"SMC","LARGE"))))))Micro / Small / Medium / SMC / Large
LAI Act size status: =IF(A2="","",IF(OR(E2="Unsure",E2=""),"CHECK BY HAND: ARE 25% OR MORE OF CAPITAL OR VOTING RIGHTS CONTROLLED BY PUBLIC BODIES? (REC 2003/361 ANNEX ART 3(4); REC 2025/1099 PT 3.3)",IF(E2="Y","LARGE: 25%+ PUBLIC-BODY CONTROL, NOT SME OR SMC UNLESS AN INVESTOR EXCEPTION APPLIES (REC 2003/361 ANNEX ART 3(2), 3(4); REC 2025/1099 PTS 3.3, 3.4)",IF(OR(F2="Unsure",F2=""),"CHECK BY HAND: ANY PARTNER (25%+) OR LINKED (CONTROL) ENTERPRISES? (REC 2003/361 ANNEX ART 3; REC 2025/1099 PT 3)",IF(AND(F2="Y",G2<>"Y"),"CHECK BY HAND: ADD PARTNER DATA PRO RATA AND LINKED DATA AT 100% FIRST (REC 2003/361 ANNEX ART 6; REC 2025/1099 PT 6.2)",IF(K2="MISSING DATA","MISSING DATA: ENTER HEADCOUNT (AWU), TURNOVER AND BALANCE SHEET TOTAL FROM THE LATEST APPROVED ACCOUNTS (ANNEX ART 4(1); PT 4.1)",IF(H2="","CHECK BY HAND: ENTER THE STATUS HELD GOING INTO THIS PERIOD (TWO-PERIOD RULE, ANNEX ART 4(2); PT 4.2)",IF(H2="New",IF(OR(K2="Micro",K2="Small",K2="Medium"),"SME ("&UPPER(K2)&")",UPPER(K2))&" (NEW BUSINESS: BONA FIDE ESTIMATE, ANNEX ART 4(3); PT 4.3)",IF(H2=K2,IF(OR(K2="Micro",K2="Small",K2="Medium"),"SME ("&UPPER(K2)&")",UPPER(K2)),IF(I2="Y",IF(OR(K2="Micro",K2="Small",K2="Medium"),"SME ("&UPPER(K2)&")",UPPER(K2))&" (CHANGED: SAME RESULT IN TWO CONSECUTIVE PERIODS, ANNEX ART 4(2); PT 4.2)",IF(I2="N",IF(OR(H2="Micro",H2="Small",H2="Medium"),"SME ("&UPPER(H2)&")",UPPER(H2))&" (KEPT: CEILINGS CROSSED IN ONE PERIOD ONLY, ANNEX ART 4(2); PT 4.2)","CHECK BY HAND: DID THE PREVIOUS PERIOD ALSO GIVE "&K2&"? (TWO-PERIOD RULE)")))))))))))After public-body, group and two-period checks
MArt 99(4) maximum fine, EUR million: =IF(OR(A2="",LEFT(L2,5)="CHECK",LEFT(L2,7)="MISSING"),"",IF(OR(LEFT(L2,3)="SME",LEFT(L2,3)="SMC"),ROUND(MIN(15,0.03*C2),3),ROUND(MAX(15,0.03*C2),3)))Lower-of for SME and SMC
NArt 99(3) (Article 5) maximum fine, EUR million: =IF(OR(A2="",LEFT(L2,5)="CHECK",LEFT(L2,7)="MISSING"),"",IF(LEFT(L2,3)="SME",ROUND(MIN(35,0.07*C2),3),ROUND(MAX(35,0.07*C2),3)))Lower-of for SME only
ODates vs today: =IF(A2="","",IF(Settings!$B$1<DATE(2026,12,2),(DATE(2026,12,2)-Settings!$B$1)&" DAYS TO 2 DEC 2026 (NEW ART 5 BANS)","NEW ART 5 BANS APPLY SINCE 2 DEC 2026")&"; "&IF(Settings!$B$1<DATE(2027,12,2),(DATE(2027,12,2)-Settings!$B$1)&" DAYS TO 2 DEC 2027 (ANNEX III HIGH-RISK RULES)","ANNEX III HIGH-RISK RULES APPLY SINCE 2 DEC 2027"))Vs Settings!B1
PTo-do list: =IF(A2="","",TEXTJOIN("; ",TRUE,IF(OR(LEFT(L2,5)="CHECK",LEFT(L2,7)="MISSING"),"finish the size check before relying on any SME or SMC rule",""),IF(LEFT(L2,3)="SME","lower-of fine caps for every AI Act fine (Art 99(6))",""),IF(LEFT(L2,3)="SMC","lower-of fine caps only for Art 99(4) and 99(5) fines; Art 5 fines keep the higher-of cap of EUR 35 000 000 or 7% (Art 99(6a), 99(3))",""),IF(LEFT(L2,5)="LARGE","no SME or SMC fine cap: higher-of amounts apply (Art 99(3) to (5))",""),IF(AND(OR(LEFT(L2,3)="SME",LEFT(L2,3)="SMC"),J2="High-risk provider"),"Annex IV technical documentation may use the Commission simplified form (Art 11(1)); QMS proportionate to size (Art 17(2))",""),IF(AND(LEFT(L2,3)="SME",J2="High-risk provider",F2="N"),"simplified QMS elements available: no partner or linked enterprises (Art 63(1))",""),IF(AND(LEFT(L2,3)="SME",J2="High-risk provider",F2="Y"),"no Art 63(1) simplified QMS: the client has partner or linked enterprises",""),IF(AND(LEFT(L2,3)="SMC",J2="High-risk provider"),"Art 63(1) simplified QMS is for SMEs only, not SMCs",""),IF(AND(OR(LEFT(L2,3)="SME",LEFT(L2,3)="SMC"),J2="Deployer"),"as deployer the size mainly changes the fine cap; deployer duties stay the same",""),"keep the latest approved accounts, AWU workings and ownership chart on file; record who decided and the date"))Cites each article

Step 2: what the test rows returned

Tested in LibreOffice Calc on 9 Nov 2026 with Settings!B1 fixed at 9 Nov 2026, on fourteen made-up rows (no real business) plus an empty row. All fourteen gave the intended status and fine figures; the empty row stayed blank; no formula errors. Column O returned "23 DAYS TO 2 DEC 2026 (NEW ART 5 BANS); 388 DAYS TO 2 DEC 2027 (ANNEX III HIGH-RISK RULES)" on every row.

ExampleAI Act size statusArt 99(4) max, EUR mArt 99(3) max, EUR m
1: bakery chain with a chatbotSME (MICRO)0.0450.105
2: payroll bureauSME (SMALL)0.270.63
3: HR software houseSME (MEDIUM)1.84.2
4: grew past medium this year onlySME (MEDIUM) (KEPT: CEILINGS CROSSED IN ONE PERIOD ONLY, ANNEX ART 4(2); PT 4.2)1.84.2
5: grew past medium two years runningSMC (CHANGED: SAME RESULT IN TWO CONSECUTIVE PERIODS, ANNEX ART 4(2); PT 4.2)1.835
6: credit-scoring vendorSMC4.235
7: logistics groupLARGE1535
8: SMC over the money ceilings onceSMC (KEPT: CEILINGS CROSSED IN ONE PERIOD ONLY, ANNEX ART 4(2); PT 4.2)635
9: municipal utility companyLARGE: 25%+ PUBLIC-BODY CONTROL, NOT SME OR SMC UNLESS AN INVESTOR EXCEPTION APPLIES (REC 2003/361 ANNEX ART 3(2), 3(4); REC 2025/1099 PTS 3.3, 3.4)1535
10: subsidiary, group data not addedCHECK BY HAND: ADD PARTNER DATA PRO RATA AND LINKED DATA AT 100% FIRST (REC 2003/361 ANNEX ART 6; REC 2025/1099 PT 6.2)--
11: subsidiary, group data addedSME (MEDIUM)0.92.1
12: start-up, first yearSME (SMALL) (NEW BUSINESS: BONA FIDE ESTIMATE, ANNEX ART 4(3); PT 4.3)0.150.35
13: headcount not yet worked outMISSING DATA: ENTER HEADCOUNT (AWU), TURNOVER AND BALANCE SHEET TOTAL FROM THE LATEST APPROVED ACCOUNTS (ANNEX ART 4(1); PT 4.1)--
14: prior status unknownCHECK BY HAND: ENTER THE STATUS HELD GOING INTO THIS PERIOD (TWO-PERIOD RULE, ANNEX ART 4(2); PT 4.2)--

Example 5 shows the gap: once the client becomes an SMC, the Article 5 fine cap jumps from EUR 4.2 million (lower-of, as an SME) to EUR 35 million (higher-of), although its Article 99(4) cap stays at EUR 1.8 million.

Step 3: checklist

  1. Take headcount (annual work units: employees, owner-managers, active partners; not apprentices, students in vocational training or maternity/parental leave), turnover excluding VAT and the balance sheet total from the latest approved accounts.
  2. Draw the ownership chart. Add partner enterprises (25% or more) pro rata and linked enterprises (control) at 100%, unless already in consolidated accounts.
  3. Check whether public bodies control 25% or more of capital or voting rights, and whether an investor exception applies (business angels, venture capital, universities, institutional investors, small autonomous local authorities).
  4. Apply the two-period rule: status changes only when the ceilings are crossed in two consecutive accounting periods.
  5. Find the client's AI Act role for each AI system (role check sheet) and whether any system is high-risk (Annex III check).
  6. Check every AI use against the Article 5 list before 2 December 2026 (Article 5 list). For SMCs the Article 5 fine cap is the higher-of amount.
  7. Record the figures used, who decided and the date.

Step 4: what to tell the client (template)

Hello [name], the EU AI Act, as amended by Regulation (EU) 2026/1744, now defines SMEs by Commission Recommendation 2003/361/EC and small mid-cap enterprises (SMCs) by Recommendation (EU) 2025/1099. On your latest approved accounts ([headcount] staff, EUR [turnover] million turnover, EUR [balance sheet] million balance sheet, [group position]) our check gives [result]. That means [lower-of fine caps for all AI Act fines / lower-of caps only for Article 99(4) and (5) fines, not for Article 5 bans / no size-based cap]. New Article 5 bans apply from 2 December 2026, and high-risk rules for Annex III systems from 2 December 2027. Please tell us about any change in ownership or a second year over the ceilings, as that can change the result. This is a regulatory checklist, not legal advice; for any borderline case please take a written legal opinion.

Sources read

Read on 9 Nov 2026. Regulation (EU) 2026/1744 (Digital Omnibus on AI), CELEX 32026R1744, OJ L 24.7.2026: recital 6; the amendments to Article 1(2)(g), Article 3 (new points (14a) and (14b)), Article 11(1) second subparagraph, Article 17(2), Article 57(3a), Article 63(1), Article 70(8), Article 99(1), new Article 99(4)(da) and new Article 99(6a), and Article 113, third paragraph, points (a) and (c); Article 4 (entry into force). Regulation (EU) 2024/1689 (AI Act), CELEX 32024R1689: Article 99(3) to (7). Commission Recommendation 2003/361/EC, CELEX 32003H0361: recital 13 and Annex Articles 2, 3, 4, 5 and 6. EUR-Lex refused automated fetches today (HTTP 202 with an empty body, and 403), so for those three texts we used our saved copies of the official EUR-Lex text and re-read the quoted wording against them on 9 Nov 2026. Commission Recommendation (EU) 2025/1099 (C(2025) 3500 of 21 May 2025) Annex points 1 to 6.4 were read today from the PDF on the European Commission's single-market-economy website, not from the Official Journal copy on EUR-Lex. Not read for this guide: the Commission's simplified technical documentation form and Article 63 guidelines (not checked for publication); the SME User Guide; national penalty laws; national lower ceilings under Article 2 of Recommendation 2003/361; case law. Our reading, flagged: that Article 99(6a) leaves SMCs with the higher-of cap for Article 5 fines; that the AI Act's SME and SMC definitions carry the recommendations' group-aggregation and two-period rules; using annual turnover as a stand-in for "total worldwide annual turnover for the preceding financial year" in columns M and N; treating 25%+ public-body control as LARGE without checking the investor exceptions; and the column grades.

Frequently asked questions

Why does company size matter under the AI Act?

Several AI Act rules depend on size. For SMEs, including start-ups, each fine is capped at the lower of the fixed amount or the turnover percentage (Article 99(6)), while other companies face the higher of the two. Regulation (EU) 2026/1744 (Digital Omnibus on AI) added definitions of SME and small mid-cap enterprise (SMC) to Article 3 and extended some SME measures to SMCs.

What is an SME for the AI Act?

New Article 3(14a) points to Article 2 of the Annex to Commission Recommendation 2003/361/EC: fewer than 250 persons and annual turnover not exceeding EUR 50 million and/or annual balance sheet total not exceeding EUR 43 million. Small: fewer than 50 persons and turnover and/or balance sheet not over EUR 10 million. Micro: fewer than 10 persons and turnover and/or balance sheet not over EUR 2 million.

What is a small mid-cap enterprise (SMC)?

New Article 3(14b) points to point 2 of the Annex to Commission Recommendation (EU) 2025/1099: an enterprise that is not an SME, employs fewer than 750 persons and has an annual turnover not exceeding EUR 150 million or an annual balance sheet total not exceeding EUR 129 million. Partner and linked enterprises and public-body control are counted in a similar way to the SME definition.

Do SMCs get the lower fine cap for Article 5 breaches?

No, on our reading. New Article 99(6a) gives SMCs the lower-of cap only for the fines in paragraphs 4 and 5 of Article 99. Article 5 fines are in paragraph 3 (up to EUR 35 000 000 or 7% of worldwide annual turnover, whichever is higher), and Article 99(6) gives the lower-of cap for paragraphs 3, 4 and 5 to SMEs only. New Article 5 bans apply from 2 December 2026.

What happens if a client grows past a ceiling in one year?

Both recommendations have a two-period rule: crossing a headcount or financial ceiling at the closure of the accounts does not change the status unless the ceilings are crossed over two consecutive accounting periods (Recommendation 2003/361 Annex Article 4(2); Recommendation 2025/1099 point 4.2). New businesses without approved accounts use a bona fide estimate made during the financial year.

Which simplifications are for SMEs only?

Article 63(1) as amended lets SMEs, including start-ups, comply with certain quality management system elements in a simplified way, but only if they do not have partner or linked enterprises within the meaning of Recommendation 2003/361/EC. SMCs are not named there. SMEs and SMCs can both use the Commission's simplified technical documentation form (Article 11(1) as amended), and the quality management system is proportionate to size (Article 17(2) as amended).

Related: Article 99 fines and the SME lower-amount rule · AI Act dates after the Digital Omnibus · Article 62 SME support · Article 111(2) grace period sheet · client AI inventory for accountants.

Keep each client's size status next to its AI systems in one register: the EURO AI Register has a free edition.

← All guides

Unadhi Guides are free, independent explainers. We correct errors as soon as we find them: write to mininglife7@gmail.com.